Why Netgear Nighthawk R6700V3 Won’t Power On?
Internet is ever growing since it’s invent. If we begin counting the number of technical gadgets that use internet to operate, it’ll be countless. All of us so much rely on internet today. Netgear, a renowned brand provides best routers to meet internet needs. However, even the best devices are prone to issues. Netgear Nighthawk R6700V3 router is no exception. A user recently reported an issue with its power connection.
It seems that the router when plugged in, flashes all the LEDs on and then everything goes off. Nothing happens after that. The router doesn’t power on at all. This is a very common scenario that many router users may come across. Keeping those users in mind, this blog has been jotted down that comprises the effective yet simple fixes to get the router up and running in no time.
How to Fix Netgear Nighthawk R6700V3 Power Issues?
Are you trying to switch on your Netgear router but it does not turn on? Has this issues appeared after a power outage? Usually power outages are responsible for occurrence of such issues. Use the fixes highlighted ahead and get rid of the problem easily:
1. Plug R6700V3 in an Alternative Outlet
Power outages can damage the wall outlets. Otherwise also, if you have plugged in the router into a damaged wall outlet, you will not have your router work properly. We suggest you check the power socket now. Use another available wall outlet to plug in the router and then try turning it on. Does it work now?
2. Use Correct Power Cord
Are you using the same power cord that came with the Netgear Nighthawk R6700V3 router? Confirm this first. It is recommended that you use the same cable that came in the package for optimal performance of the router. Use the right power cable and then see if the issue gets fixed or not.
3. Reset Nighthawk R6700V3
If the Netgear router stops working and doesn’t power up at all, then you should try resetting it to the factory settings. This also helps if the router stops working after a power outage.
Go ahead and check the power supply to the router. See to it that it is fully booted up. Thereafter, you should find the Reset button. Use a sharp pointed object like a paper clip to press and hold the button for some time and then release it. The router will be reset to the default factory settings.
Set Up the Nighthawk R6700V3 Once Again
Once you reset your router to the default values, you need to set it up once again. Setting up the router is nothing but connecting it to the modem or the main gateway. The instructions given below will help you set your router up using the manual method:
- If the router and modem are powered on, consider powering them off now.
- Connect the Netgear Nighthawk R6700V3 router with the modem using a LAN cable or let the devices connect wirelessly.
- Now, switch on the modem and then the router.
- Run a browser on your computer that is connected to the router’s network.
- Go to Netgear router setup page using the URL routerlogin.com or IP 192.168.1.1.
- On this very page, follow the prompts that appear and complete the router setup.
This way you can complete the Netgear Nighthawk R6700V3 setup after you have reset it. You can now do the Nighthawk router login and customize its settings in the admin portal. Check for firmware updates and get the router updated now.
You should also change the default admin password and default WiFi password of the router to secure your home network.
To Briefly Conclude
If your Netgear Nighthawk R6700V3 router stops working and won’t power on, then using the solutions discussed in this blog post will help you get the router up and running. You can now connect the client devices to the router’s network without any trouble.