Routerlogin.net Not Working [5 Effective Solutions to Fix It]
Routerlogin.net is a gateway that opens the possibility to change the settings of a Netgear WiFi router. However, it has been noticed that a few users are unable to access this URL due to its non-working status. What causes the issue and what are the workarounds that can be implemented in this scenario? This blog will shed light on such important elements. So, without any delay, let’s start the guide to fix the routerlogin.net not working problem.
Connect to Your Router First
Other solutions will come later but, first of all, we suggest you ensure that the device on which you are trying to access routerlogin.net is connected to the router. The major reason why the URL is not working for you is that you are either using the cellular data (if you are using a mobile phone) or your computer is connected to some anonymous network that does not belong to the Netgear router.
You can also take the aid of a LAN cable in case you are using a computer or laptop for managing the WiFi router’s network. However, make sure that you put a working one to use. Otherwise, internet connection problems will arise, and accessing the settings of the router will become a more difficult task.
Why is Routerlogin.net Not Working and How to Fix It?
The table given below will help you learn why you are unable to access the login URL of your Netgear WiFi router and what you can do to fix it. But, before having a glance at that, we suggest you power cycle the home network.
Chances are that a software glitch is preventing you from accessing the web portal of the wireless router. For power cycling the network, you are required to switch off the modem first and then the router. After waiting for at least 15 minutes, consider switching on both devices in the same sequence as you switched them off. Now, see if the routerlogin.net URL is working. If the story is still the same, then you know what to do.
| Sr.No | Reason | Solution |
|---|---|---|
| 1 | An issue with the connection source between the computer and router | If your router and computer are connected via an Ethernet cable, use the WiFi connection and vice-versa. |
| 2 | The web browser in use is accumulated with cache | Go to the Settings section of the browser and erase all the cache, cookies, and browsing history. Moreover, update it to the latest version. |
| 3 | You used the search bar to access the routerlogin.net web URL | No web address can be accessed via the browser’s search bar. So, use the address bar and see if you are still getting the routerlogin.net not working error. |
| 4 | Antivirus protection or firewall is active on your client device | Antivirus programs are known to cause problems while accessing networking sites. So, temporarily disable them before accessing the routerlogin URL. |
| 5 | The browser is not allowing you to access the default URL in real time | You can try switching to another web browser. Let us say, if you are using Google Chrome, consider using Microsoft Edge or Apple Safari. |
So, these were the 5 effective solutions that will help you access the login URL of a Netgear WiFi router without any difficulty. We hope that you will also get success with the process. But, what if the situation is still not favoring you? In that event, you are suggested to proceed with network management via the default IP address of the router. The next section will make you aware of the default IP as well as the process of using it.
Use Netgear Router IP Address at Last
The default IP address of the router acts as an alternative to the web address. It means it serves the same purpose as routerlogin.net. FYI, the default IP address of a major proportion of Netgear routers is 192.168.1.1 However, we still suggest you check the user manual or the router’s label to know the default IP address. Once you find that, follow the steps given below:
- Open a web browser on a computer connected to the Netgear router (wirelessly or wired).
- Now, make your way to the address bar.
- Type the default IP address of the WiFi router.
- Press Enter.
- The router login window will appear.
The appearance of the admin page of the router is a sign that you’ve successfully accessed the IP address. Now, all you have to do is input the user name and password of the router to proceed further. So, what are you waiting for? Enter the required values, hit Log In, and make changes to the WiFi router’s settings the way you fancy.
In a Nutshell
The routerlogin.net not working issue is not an outcome of a single reason. Many causes work together to halt your access to the router’s management panel. But, we hope that with the help of the solutions provided above, you will be able to remove all these obstacles and have a smooth network management experience.