Netgear Router Not Connecting to Internet: The Solution!
Netgear router is on but there’s no internet connection? Do not worry about it anymore. We have penned down this post for users like you who are stuck with Netgear router not connecting to internet issue. There are several reasons for this problem. Outdated firmware on the router is an example. What are other reasons that you are facing no internet issues from your Netgear router? Learn the same by going through this very guide that comprises not only the reasons but also the solutions for the issue under discussion.
Why is the Netgear Router Not Connecting to Internet?
We did mention earlier that if you haven’t updated the firmware on your router and it is running on a older version, then you may experience the similar isues. Apart from that, faulty cables and poorly connectd devices can also be responsible.
Some more reasons are:
- Excessive distance between the router and modem,
- Inadequate power supply to all or any of the devices,
- Signal interference due to other devices around
- Internet issue from the ISP end
This is all about the reasons, we shall now focus on the solutions. The next section highlights the effective solutions that you should apply so that you can begin getting an internet connection from your Netgear router.
How to Get the Netgear Router Connected to Internet?
1. Replace the Damaged Cables
We suggest you first check all the cables in use to connect the devices. None of the cables or wires should be broken or have cuts on them. You should consider replacing the worn-out cables with good quality cables immediately so that the connections are stable.
2. Fix any Faulty Connection
The router gets its input signals from th main gateway or the modem. the Netgear router has to be firmly connected to the modem. If you find that the connection is not stable then you know what is the reason behind the Netgear router not connecting to internet issue.
Fix the Ethernet connection if you have used a wired mode for connecting the two devices. In case the router and modem are connected wirelessly, then reduce the distance between them so that they communicate easily.
3. Supply Adequate Power to Devices
The Netgear router or the modem if not receiving a consistent power supply from the respective wall outlet can cause such issues. We recommend you verify the power supply to the router as well as the modem. Inspect the power outlets and the power cables in use. If any of the power sockets is damaged then use an alternative outlet to plug the router or the modem. After you are sure that the devices are receiving a consistent power supply, you should connect to its network.
4. Power Cycle the Network
In case you are still stuck with the no internet issue, then you should perform a power cycle of the whole network. You should power down the router and the modem and remove the cables connected to them including the power cable. Now, let the devices rest for some time. Establish the connection between the devices and plug the router and the modem into well working power outlets in the home. Make sure that the connection between them is stable and the power supply is stable. Now you should be able to connect to the internet using your router.
In the End
We hope that the solutions provided in this guide have helped you fix the Netgear router not connecting to internet issue. However, if you still can not connect to the internet then reset your router right away. Resetting will restore the factory values on the router and delete the current configuration settings from it.
The reset process can be executed by using these steps:
- Remove the connection between the router and modem.
- See to it that the router is fully booted up.
- Press and hold the reset hole on the router using a sharp object.
- After about 10 seconds, release the button (hole) and the router will be reset.
Set up your Netgear router once again and you are good to go. No internet issue will no longer be troubling you.