What is IP Address and How to Use It?

What is IP Address and How to Use It?

Without a doubt, it can be stated that today’s world is driven by technology. Numerous networking gadgets have entered the market intending to provide users with a lightning-fast internet connection. With that said, there can be hundreds or thousands of devices present on the same network. But, have you ever thought about how these devices communicate over the internet? Well, that has become possible just because of a unique set of digits separated by dots. The unique numbers are known as IP addresses. is one such IP address that is used by many networking gadgets for communication over the internet.

IP addresses to some devices are assigned by the Internet Service Providers whereas some devices run on the default IP addresses provided by manufacturers. But, whatever the case is, the user needs to access this IP address to make changes to the corresponding device’s settings.

What is IP Address

Just in case, your networking device i.e. WiFi router, extender, or access point runs on the IP address, you can use it to take advantage of the bundle of features specified by your device’s manufacturer. In this write-up, we’ve rounded up complete information on this IP address. So, keep reading.

What is IP Address?

In the introduction, we made it clear to you that several devices support the use of the IP address. Thus, you are free to use it for making changes to the home network settings. You can also use the web address of the device as an alternative to the IP address. To know the web address of your device, you need to check the user manual.

Now that you are aware of what is the use of the IP address that we’re discussing, it is time to use it in actuality. How to do that? The instructions have been revealed in the next section.

Using IP Address – Steps

Before you start the process of accessing the IP address of your router or extender, you are suggested to power cycle the entire network. The power cycling process must be carried out in this sequence – modem (1st), router (2nd), and then the extender (3rd – if available). Apart from this, ensure that your devices are well connected with the aid of a LAN cable. Once done, follow the steps below.

Note: For reference, we are considering the IP as the router’s IP. You can use it according to the networking product you own.

1. Connect the Computer to Router

Without connecting your computer to the router (through a cable or via WiFi), you won’t be able to access the default IP address. Therefore, open WiFi Utility on your computer and connect it to the network that belongs to your router. However, take care of the following things during this process:

2. Open a Web Browser

As soon as your computer gets connected to the network of the router, you need to load an internet browser. Numerous options are available when it comes to picking a web browser for accessing the router’s IP. However, the chosen one is supposed to be:

3. Access

After loading an internet browser, the only task you’re left with is the assessment of the IP address. To do that, you need to move to the address bar of the browser and follow these instructions:

With that, you’ve successfully accessed the router’s IP address. Just by a click of the Log In or OK button, you will land on the dashboard of the router and be free to change the settings the way you fancy.

Can’t Access IP – Solutions

Some users, even after following the steps mentioned above fail to use the IP address of the router. In that scenario, paying attention to the techniques highlighted below is recommended.

1. Use the Correct IP

Before all else, consider checking whether the IP belongs to your product model or not. The IP address may vary from brand to brand. In addition, you also need to ensure that the IP address has been entered without any mistakes.

2. Check the Internet Connection

A poor internet connection can also cause problems while accessing the default IP address of the device. In that case, you need to run a quick eye scan on the LAN cables involved. All of them should be intact.

3. Temporarily Disable Antivirus

Antivirus are good for PCs and we all know that. However, sometimes, they too can mess up with the network management process. Therefore, you are required to temporarily disable the antivirus software installed on the PC.

End Note

Here, we are ending our post written to enlighten you about the IP address. Hopefully, you will be able to get success in the process. Just in case you don’t, try to execute the process again after resetting your WiFi device.

Disclaimer: router-setup.live talks about the installation and management of various products brought in by Netgear. You can refer to the information provided here if you want to make the most of your home network. However, we disclaim that any usage of images, logos, brand name, or trade marks are for referential purposes. Use the information here at your own discretion.